|
|
The place for comms people to network |
Commsplace.com Knowledge Base
| Standard Designation | Title | Description |
| EN 60603-7 | Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8 way, including fixed and free connectors with common mating features (IEC 603-7:1990) | Copper connectors - European |
| IEC 603-7 | Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8 way, including fixed and free connectors with common mating features | Copper connectors - Interni |
| IEC 807-8 | Rectangular connectors for frequencies below 3 MHz - Part8: Detail specification for connectors, four signal contacts and earthing contacts for cable screen | Copper connectors - Interni |
| EN 186000-1 | Generic specification: Connector sets for optical fibres andc ables - Part 1: Requirements, test methods and qualification approval procedures | Optical connectors - European |
| IEC 874-10 | Connectors for optical fibres and cables - Part 10: Sectional specification for fibre optic connector - Type BFOCI2,5 | Optical connectors - InternI |
| IEC 874-14 | Connectors for optical fibres and cables -Part 14: Sectional specification for fibre optic connector -Type SC | Optical connectors - InternI |
| IEC 1073-1 | Splices for optical fibres and cables -Part 1: Generic specification - Hardware and accessories | Optical connectors - InternI |
| ANSI/TIA/EIAT5867 | Transmission performance specifications for field testing of unshielded twisted-pair cabling systems | Field test equipment - USA |
| 85 EN 50081-1 | Generic Emission Standard Part 1:Residential, Commercial and Light Industry | EMC - European |
| 85 EN 50081 -2 | Generic Emission Standard Part 2. Heavy Industry | EMC - European |
| 85 EN 50082-1 | Generic Immunity Standard Part 1. Residential, Commercial and Light Industry | EMC - European |
| BS EN 50082-2 | Generic Immunity Standard Part 2. In heavy Industry -- | EMC - European |
| BS EN 55022 | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment | EMC - European |
| EN 55105 | EMC Immunity Requirements for Information Technology Equipment excluding Telecommunication Terminal Equipment (formerly prEN 55024). | EMC - European |
| BS EN 50173 | Information Technology - Generic Cabling Systems | Cabling design - UK (Q2, 1996) |
| EN 50173 | Information Technology - Generic Cabling Systems | Cabling design - Europe |
| IS 11801 | Information Technology - Generic Cabling for Customer Premises | Cabling design - InternI |
| ANSI/TIA/EIA 568-A | Commercial Building Telecommunications Cabling Standard | Cabling design - USA |
| BS EN 50098-1 | Customer premises cabling for information technology -Part 1: ISDN basic access | Cabling design - UK |
| EN 50098-1 | Customer premises cabling for information technology -Part 1: ISDN basic access | Cabling design - Europe |
| BS EN 50098-2 | Customer premises cabling for information technology -Part 2: 2048 kbits ISDN primary access and leased line network interface | Cabling design - UK (03,1996) |
| EN 50098-2 | Customer premises cabling for information technology -Part 2: 2048 kbits ISDN primary access and leased line network interface | Cabling design - Europe |
| DIS 14709-1 | Customer premises cabling for information technology -Part 1: ISDN basic access | Cabling design - InternI (1997) |
| DIS 14709-2 | Customer premises cabling for information technology -Part 2: 2048 kbits ISDN primary access and leased line network interface | Cabling design - InternI (1998) |
| BS 6701 | Installation of Apparatus Intended for Connection to Certain Telecommunication Systems | Cabling installation - UK |
| BS 7671 | lEE Wiring Regulations, 16th Edition | Cabling installation - UK |
| BS 7718 | Installation of fibre optic cabling | Cabling installation - UK |
| EN 50174 | Information Technology - Cabling Installation Part 1 - General Requirements (available in draft 1996)Part 2- Inside buildings (available in draft 1997)Part 3-Outside buildings (available in draft 1996) | Cabling installation - Europe |
| DIS 14709-3 | Information Technology - Cabling Planning and Installation Guide | Cabling installation - Interni (1998) |
| IEC 1156 | Generic specification for multicore and symmetrical pair/quad cables for digital communications | Copper cables - InternI |
| HD608 | Generic specification for multicore and symmetrical pair/quad cables for digital communications | Copper cables - Europe |
| EN 50167 | Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication | Copper cables - Europe LSZH, 100MHz, screened |
| EN 50168 | Sectional specification for work wiring cables with a common overall screen for use in digital communication | Copper cables - Europe LSZH, 100MHz, screened |
| EN 50169 | Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication | Copper cables - Europe LSZH, 100MHz, screened |
| EN 188000 | Generic specification - Optical fibres | Optical fibres - European |
| EN 188100 | Sectional specification - Single-mode (SM) optical fibres | Optical fibres - European |
| EN 188101 | Family specification - Single-mode dispersion optical fibres | Optical fibres - European |
| EN 188201 | Family specification: Ala graded index multimode optical fibres | Optical fibres - European |
| EN 188202 | Family specification: Aib graded index multimode optical fibres | Optical fibres - European |
| IEC 793-2 | Optical fibres - Part 2: Product specifications | Optical fibres - InternI |
| ITU-T Rec. G.650 | Transmission media characteristics. Definition and test methods for the relevant parameters of single-mode fibres | Optical fibres - Interni |
| ITU-T Rec. G.651 | Characteristics of a 50/1 25 ~tm multimode graded index optical fibre cable | Optical fibres - Interni |
| EN 187000 | Generic specification - Optical fibre cables | Optical cables - European |
| EN 60794-3(EN 187100) | Optical fibre cables - Part 3: Telecommunication cables -Sectional specification (IEC 794-3:1994) | Optical cables - European |
| IEC 794-2 | Optical fibre cables - Part 2: Product specifications | Optical cables - InternI |